Lowongan Kerja Terbaru PT ASI Pujiastuti Aviation (Susi Air) Medan

Merekrut.com – PT ASI Pujiastuti Aviation (Susi Air) adalah maskapai penerbangan indonesia yang dioperasikan oleh PT ASI Pujiastuti Aviation dengan penerbangan berjadwal dan charter. Berkantor-pusat di Pangandaran,Jawa Barat , Susi Air beroperasi dari lima pangkalan utamanya di Medan, Jakarta, Balikpapan, Kendari, Bandung, Cilacap, dan Sentani akan tetapi maskapai ini masih terdaftar pada daftar maskapai penerbangan dilarang di Uni Eropa.

Didirikan pada akhir 2004 oleh Susi Pudjiastuti, Susi Air awalnya didirikan untuk mengantarkan muatan perikanan dari perusahaan lain milik Susi, PT ASI Pudjiastuti. Gempa bumi Samudera Hindia 2004 yang terjadi di pesisir barat Sumatra beberapa saat setelah dua pesawat Cessna Grand Caravan pertama Susi Air dipesan, langsung digunakan untuk membantu pengiriman peralatan dan obat-obatan bagi regu penolong.

PT ASI Pujiastuti Aviation (Susi Air)

POSISI LOWONGAN :

1. Airtractor AT802 Aircraft Maintenance Technician

Responsibilities :

• Perform scheduled and unscheduled maintenance/inspections Plan and supervise aircraft maintenance schedules and inspections.
  Assist the pilots with daily pre and post flight checks.
  Perform all assigned work in accordance with approved maintenance program and procedures.

Requirements :

• At least 5 years hands on experience working on the PC6 Pilatus Porter
  A&P FAA certificate or EASA license, any other ICAO compliant can be separately considered. Must be C208B type rated.
  Communicate effectively in English.
  Good in fault troubleshooting and perform heavy maintenance on the PC6 Pilatus Porter.
  Familiar with Pratt and Whitney engine PT6A-27.
  Must possess sufficient hand tools to perform his/her duties as maintenance engineer/technician.
  Willing to stay and work in Indonesia.

2. Cessna C208B Aircraft Maintenance Technician

Responsibilities :

• Perform scheduled and unscheduled maintenance/inspections Plan and supervise aircraft maintenance schedules and inspections.
  Assist the pilots with daily pre and post flight checks.
  Perform all assigned work in accordance with approved maintenance program and procedures.

Requirements :

• At least 5 years hands on experience working on Cessna Caravan C208B.
  A&P FAA certificate or EASA license, any other ICAO compliant can be separately considered.
  Must be C208B type rated.
  Communicate effectively in English
  Perform scheduled and unscheduled maintenance/inspections. Good in fault troubleshooting and perform heavy maintenance
  Familiar with Pratt and Whitney engines PT6A-114A
  Must possess sufficient hand tools to perform his/her duties as maintenance engineer/technician
  Willing to stay and work in Indonesia

3. Piaggio P180 Avanti Maintenance Technician

Responsibilities :

• Perform scheduled and unscheduled maintenanceftnspections.
  Plan for Piaggio P180 Avanti maintenance schedules
  Assist the pilots with daily pre and post flight checks.

Requirements :

• At least 4 years hands on experience working on the Piaggio P180 Avanti.
  A&P FAA certificate or EASA license, any other authorization can be separately considered.
  Communicate effectively in English.
  Good in fault troubleshooting and perform heavy maintenance on the Piaggio P180 Avanti
  Familiar with Pratt and Whitney engine PT6A-66B.
  Must possess sufficient hand tools to perform his/her duties as maintenance engineer/technician.
  Willing to Stay and work in Indonesia.

4. PC6 Pilatus Porter Maintenance Technician

Responsibilities :

• Perform scheduled and unscheduled maintenanceftnspections.
  Plan for PC6 Pilatus Porter maintenance schedules.
  Assist the pilots with daily pre and post flight checks.

Requirements :

• At least 5 years hands on experience working on the PC6 Pilatus Porter
  A&P FAA certificate or EASA license, any other ICAO compliant can be separately considered.
  Must be C208B type rated.
  Communicate effectively in English.
  Good in fault troubleshooting and perform heavy maintenance on the PC6 Pilatus Porter.
  Familiar with Pratt and Whitney engine PT6A-27.
  Must possess sufficient hand tools to perform his/her duties as maintenance engineer/technician.
  Willing to Stay and work in Indonesia.

5. Helicopter Maintenance Technician

Responsibilities :

• Perform scheduled and unscheduled maintenance/inspections.
  Plan for Helicopter maintenance schedules
  Assist the pilots with daily pre and post flight checks.

Requirements :

• At least 3 years hands on experience working on Agusta Westand Helicopters AW119MKll Koala and A109S Grand
  Helicopter A&P FAA certificate or EASA license, any other authorisation can be separately considered
  Communicate effectively in English.
  Good in fault troubleshooting and perform Helicopter heavy maintenance
  Familiar with Pratt and Whitney engines PT6B-37A and PW207C.
  Willing to stay and work in Indonesia.

6. Production Planning & Control (PPC)

Responsibilities :

• Plan & schedule aircraft part production.
  Manage material procurement & inventory.
  Analyze data & report performance.
  Implement process improvements.
  Stay informed of industry best practices.
  Contribute to a positive work environment.
  Understanding of lean manufacturing
  Experience with aviation standards

Requirements :

• Fresh graduate/With minimum 1 years experience
  Maximum 35 years Old
  Willing to be located at all over Indonesia

7. Storeman

Requirements :

• Minimum diploma, bachelor degree, or equivalent
  Minimum 1 year of experience in a warehouse/store
  Proficient with inventory management systems
  Strong organizational & time management Skills
  Excellent attention to detail & accuracy
  Ability to work independently & as part of a team
  Strong communication & interpersonal skills
  Basic understanding of aircraft maintenance (preferred)
  Organized and detail-oriented.
  Proficient with inventory management systems.
  Able to work independently and as part of a team.
  Strong communication and problem-solving skills.
  Basic understanding of aircraft maintenance (preferred).

8. Tool Keeper

Responsibilities :

• Responsible for issuing, receiving, monitoring, and safe keeping of raw materials, hand toolst power tools, and other equipment in the fabrication area.
  Keep track and inventory all tools.
  Monitor damage and replace existing tools.

Requirements :

• Bachelor degree in machine engineering with minimum 1-2 years experience
  Maximum 35 years old
  Preferably Male
  Willing to be located at all over Indonesia

CARA MELAMAR LOWONGAN :

1. Dipersilahkan untuk para pencaker jika berminat dan memenuhi persyaratan lowongan kerja diatas, anda dapat kirimkan berkas dan CV lamaran yang terbaru dengan cara klik tulisan APPLY FOR JOB yang ada di paling bawah artikel ini.
2. Informasi lowongan kerja ini sewaktu-waktu dapat ditutup jika kuota sudah terpenuhi
3. Harap dibaca dengan baik dan benar secara teliti agar tidak terjadi kesalahan saat mengirim lamaran
4. Seluruh proses rekrutmen dan seleksi pelamar baru tidak dipungut biaya apapun atau GRATISS !!!

*KLIK LINK APPLY FOR JOB DIBAWAH INI*